CMX IP-9000K (IP Intercom System Zone Door Station)

รหัสสินค้า : IP-9000K

ราคา

฿ 0.00

จำนวนที่จะซื้อ
ราคารวม ฿ 0.00

สินค้าไม่เพียงพอ

สินค้าหมด

CMX IP-9000K (IP Intercom System Zone Door Station)


Overview

Door Intercom Station, non-IP intercom station with ID setting, POE, work with 16 zone separate network adapter IP-9000AK, system capacity up to 6000 units.                                                      


Feature:

  • IP-9000AK is the network adapter with 16 zone capacity to link total 16 pcs IP-9000K, thus the system cost is minimum for multiple room solution.
  • The IP-9000AK is built-in 20W low impedance amplifier for external speaker power.
  • The IP-9000AK is with closed contact input and output for door access system control.
  • Ideal solution for prison, hospital, hotel, military, factory, train station and airport.
  • Mini compact intercom panel with minimum size of 6mm aluminum material.
  • Economy range IP intercom panel at effective cost.
  • Both surface or embedded mounting ways with supplied mounting box.
  • Intercom panel built-in speaker, microphone.
  • PPT and call two types full duplex two way communication system.
  • It can start the communication to the call station by pressing the call button, the call station will be reminded with ring call and indicator as which intercom panel from where is calling. The call will be automatically transferred to next call station once busy, no answer or fault occurred.
  • With one contact output and contact input for third party communication.
  • Built-in SD card, the inside voice message could be triggered by network or contact input.
  • Non dedicated network is needed, and the system could be easily built-up over exiting LAN/WAN network.
  • Embedded server Lynux technology with two ARM and DSP high speech chip.
  • The IP-9000K Intercom panel support surface mount and in-wall installation.
  • Network data delay of less than 100 milliseconds.
  • Built-in SD card for remote program broadcast and recording use.
  • It is powered by DC12V, the power adapter is included.



Specification

Model
IP-9000K
Description
IP Network Intercom System
Mounting
Support both surface or embedded by supplied mounting box
Power Supply
DC 12V
Power Consumption
23W
Network Protocol
TCP, UDP, ARP, ICMP, IGMP
Network Speed
10/100Mbps
Audio Sampling
8KHz-44.1KHz, 16 bits
Transmission Rate
8Kbps to 320Kbps
S/N Ratio
≥90dB
Frequency Response
20Hz-20KHz
Data Delay
100 milliseconds
Connector
One line output & one RJ45 port for LAN, two contact inputs and two contact outputs, one SD input.
Dimensions
111(W)×162(D)×41(H)mm for IP-9000K
Visitors: 54,532